New Jersey Roofing Gallery

---

Below are photos from recent roofing projects in New Jersey. Click on the image to view an enlarged photo.

---

Metal Roof Restoration in West Deptford, NJ

We were able to restore this metal corrugated roof system without ripping all the old metal off. We restored the existing metal roof using UNIFLEX Elastomeric fluid applied roof restoration system on this warehouse in West Deptford, NJ. We were able to stop all the client’s leaks and present them with a warranty.

---

New Roof in Holmdel, NJ

Check out this nice and sleek new roof and skylights we installed on a charming home in Holmdel, New Jersey.

---

Metal Siding in Red Bank, NJ

We installed Englert vertical corrugated metal siding on this new office/storefront building on Front Street in downtown Red Bank New Jersey.

---

TPO Roof System – Hackettstown, NJ

We were hired to install a brand new TPO Warranty Roof System on a 24,000 square foot commercial roof in Hackettstown to prepare the roof for solar panel installation.

---

Commercial Roof – Hackettstown, NJ

We were hired to install a brand new TPO Warranty Roof System on a 24,000 square foot commercial roof in Hackettstown to prepare the roof for solar panel installation.

---

Metal Roof System – Staten Island, NY

We were hired to add some ventilation to a newly restored metal roof system in Staten Island, New York.

---

Metuchen Strip Mall – Metuchen, NJ

We were hired to remove all the none working equipment, including bulkhead/shed structure, and to stop many roof leaks. We then installed a new Johns Manville TPO membrane roof over PolyIso insulation.

---

Commercial Client – Randolph, NJ

Making emergency repairs on a standing seam roof to keep the client’s inventory protected before scheduling a Full Restoration System this Spring.

---

Courtyard Marriott – Lebanon, NJ

We were recently contacted to work on a really great job at the Courtyard Marriott in Lebanon, NJ. We were hired to repair several different sections of their flat roof that were damaged and causing leaks. While on this job we had the opportunity to work closely with the on-site Chief Engineer in order to ensure the safety and comfort of all the hotel patrons and staff. To repair the damage we installed a new Carlisle Versiweld TPO Membrane Roof System.

---

10,000 Sq. Ft. Warehouse – South Plainfield, NJ

We were hired to come up with a solution for the customer’s roof problems. This customer had recently purchased the building and had a strict budget for the repair. So, our solution was to implement a recovery system using Versico 1/2 inch insulation and a Versico 60 mil TPO Membrane Roof System..

---

Mall – Phillipsburg, NJ

Installed new roof prior to the installation of solar panels. This is a 2ply System consisting of GAF SA Base Roofing & White Granular Cap Sheet.

---

Bridgeway Rehabilitation Services – Elizabeth, NJ

Recently, we were contacted by Bridgeway Rehabilitation Services for a roof replacement. The challenge with this job was that the wood roof deck was also a finished ceiling on the inside. So, in this situation, we did not want to use roof fasteners that would go through the roof and be visible inside. Instead, we installed Polyiso insulation embedded into Versico Dash Adhesive and a new Versico 60 mil TPO fully adhered membrane roof system.

---

Mainstream Inc. – Berkeley Heights, NJ

We were hired to replace the roof over the office section of Mainstream Inc. The existing roof was the original EPDM roof. Since this was only a single roof layer, we were able to go over what already existed. We installed a layer of 1″ polyisocyanurate insulation and a new 80 mil TPO membrane fully adhered.

---

New Office Building – Red Bank, NJ

We were contracted to install new roofs and metal wall panels to a newly constructed office building located at 39 East Front Street in Red Bank, NJ. Over the slope sections we installed new insulation, as well as a new 60 mil TPO membrane roof system. Over the bulkhead we installed a new complete standing seam metal roof system. For the back of the building we installed Englert 032 aluminum wall panel siding complete with flashings and custom trim.

---

Linden, NJ Roof Replacement. Owens Corning Duration. Designer Color Summer Harvest

---

Clark, NJ Roof Replacement & Copper Cupolas. GAF Ultra Shakewood

---

Hillsborough home. Owens Corning Duration Color: Sedona Canyon. Weatherproofed chimney cap

---

Roof was experiencing leaks on the slope sections and along the flat roofs. We came in with GAF Timberline Shingles and restored the flat roofs with Karnak Karna-Sil 670 & Silicone Roof Restoration System.

---

We were hired by the owners to replace the existing built-up hot tar roof system. We went back with an affordable option doing a recovery system using 1/2″ EPS roof insulation and a new GAF EverGuard 60 mil TPO membrane roof system.

---

We installed new roof systems over these two new additions. The roofs consisted of tapered insulation sloped to roof drains. We then installed ½” Securock Coverboard over the tapered insulation, a new Tremco built-up cold process membrane roof system. This is a very durable roof system that can handle any kind of weather thrown at it and the customer gets a 20-year manufacturer’s warranty.

---

Recently, we were given the opportunity to install a truly unique roof system. A customer purchased a building in which one section has a walk out roof. The problem with the roof, however, was that the existing surface had a conventional asphalt roof system, which does not hold up well as a patio roof. We came up with a system that is made specifically for what the customer was looking for. We removed all the old roofing and bad wood, installed a layer of 5/8” T+G CDX plywood and installed a new DecTec 80 mil PVC walkable membrane deck roof system.

---

We recently started a roof maintenance plan for this company on their 70,000 Sq. Ft. building. On July, 17th 2016, we experienced a severe storm across this area consisting of drenching rain and winds over 50 MPH, which resulted in downed trees in some areas and for this customer, the loss of approximately 8500 Sq. Ft. of roofing and insulation. The storm completely pulled off the gutter and folded back the roofing. Because the storm happened at night, we received a call first thing in the morning and within an hour we were at the site. We mobilized the crew and tarped the area in question that day. When we returned to complete the project, we replaced all the damaged insulation and roofing, installed new PolyIso roof insulation to match existing. Over the insulation, we installed Firestone MB Fiberglass Base Felt and Firestone SBS White Granular Modified bitumen Membrane roof system. This highlights the importance of communication and is an example of a successful working relationship.

---

This roof had chronic leaking issues that were addressed by other contractors with no success. We could finally solve the issue while staying under budget and granting them a 15-year warranty! We re-roofed the building with a new 060 mil TPO white membrane system. Instead of tearing off the existing roofing, we could add the layer above their previous roof. In addition to preventing further leaks, the environmentally friendly roof system offers sustainability and energy efficiency.

---

This roof was severely damaged from Superstorm Sandy. Not only did portions of the roof blow off but the steel decking was compromised by the high winds. All decking was replaced with new. We then came in and installed a layer of 1” PolyIsocyanurate R-value 6.0. Over the PolyIso, we installed a layer of ¼” Securock coverboard. We then installed a Versico 60mil fully adhered TPO white membrane roof system. There are many advantages to using the combination of PolyIso and Securock. The Securock is an exceptionally strong board with enhanced bond strength that has superior protection against wind- uplift. The board is also moisture and mold resistant. Additionally, the Securock is a sustainable material since it is made from 97% recycled materials. The new roof system came with a 15-year Manufacturer’s Warranty.

---

We were recently hired to repair the mansard roof on a commercial warehouse that suffered severe damage from Superstorm Sandy. We needed to find a material that was compatible to the existing roofing that was not affected by the storm. A perfect choice was Classic Metal Roofing System’s rustic shingle. Metal shingles like this are a great choice for a commercial project. Not only are they strong, wind resistant, and largely impenetrable, they provide a beautiful and distinguished look from typical metal roofs. Additionally, these shingles–and metal roofing in general–are great for the environment. They’re made from at least 95% recycled aluminum. The product is relatively new to JDR and we were very pleased with the ease of installation. We could finish the project quickly and the owner now has a manufacturer’s warranty that covers the shingles against chipping, peeling, flaking, blistering, splitting, or cracking with age for 40 years.

---

At the Kenilworth, NJ PBA, located on Lafayette Place, we were hired to replace the existing asphalt shingles with new GAF Sovereign roofing. Within the flashing detail, we installed 032-gauge aluminum around two separate chimneys. This procedure keeps moisture out and provides a more cosmetically appealing look. We finished off by replacing the damaged 5 k gutter with a new 6” seamless gutter system to assist in drainage during heavy downpours. This building is now storm- proof!

---

We were called in to flash new HVAC curbs on a structurally prepared deck. The township restricted installation directly on the roof so we created a platform. The challenge here was flashing curbs in a cramped situation. We needed a very pliable material that was easy to work with. We used Versico PVC membrane for this job. The material sealed perfectly to the existing roof. In the end, we had a solution that worked for everyone.

---

For this project the existing roof included the original built-up asphalt with a soft corrugated aluminum panel roof installed over it. The building owner stated that the corrugated roof was a mistake and a nightmare. Since this building is an investment property, the cost was a concern, but quality was equally important. For this project, we decided to remove the metal roofing completely. Over the original asphalt roof, we then installed 3/8 EPS roof insulation. Over which we installed a new 60 mil TPO white membrane roof system. When complete, this roof was issued a 15-year manufacturer’s warranty for labor and materials. Another plus for the owner on this project was that we could recycle all the corrugated aluminum which offset a portion of the cost.

---

After several attempts by other companies to patch and repair the leaks, Acme Nissan hired Joseph David Roofing for a new solution. We applied a complete re-cover system to address all potential leaks while keeping costs down. The scope of work consisted of a layer of 3/8″ EPS roof insulation. Over the insulation, we installed a new Mule-Hide 60 mil TPO white membrane roof system complete with necessary flashings. Acme Nissan has been leak-free since the work was finished.

---

This roof on the Miele building in Princeton had been having major leaking problems for years, so we made a series of roof repairs over the field and along the wall flashings using Tremco roofing products. We also removed all the existing sealant from the coping stone and resealed using Solar Seal 900 and then applied two coats of Andek Polaseal MA concrete sealer. Since the job was completed, there has been several torrential rains but not a single leak!

---

The Goddard School had an issue with several leaks in the roof, so we proposed a system that included installing a layout of 1” of Polyisocyanurate rigid foam installation and a new 60-mil Mule Hide TPO White Thermoplastic membrane roof system. The completed project provided The Goddard School with a new watertight 15-year warranty membrane roof system and a more thermally efficient building. Cost advantages are realized through energy savings; thermal efficiency optimizes the benefits of solar gain, reducing the need for heating fuel while also significantly decreasing the energy used for cooling.

---

This roof had suffered some wind damage to the front of the building. The owner figured it was time to replace the whole roof. We first removed the old style leaking skylights. Removed all the rippled roofing from the wind damage. Installed a layer of 1″ PolyIso. roof insulation. Installed a new 060 EPDM rubber membrane roof system fully adhered. Complete with new flashing’s and sheet metal work.

---

Removed the existing layers of roofing. Repaired all the bad wood with new 3/4″ CDX plywood. Installed a layer of 1″ Polyiso roof insulation (R-value 6.00) Installed a new Mule Hide 060 fully adhered TPO thermoplastic membrane roof system complete with all new flashings and sheet metal. Notice in the photo’s how rough the old roof looked and now how smooth, like a sheet of glass, the new roof looks.

---

Edison Mechanical of South Plainfield was going to have solar panels installed on their building. We were hired by them to replace the roof before the solar panels were installed. We first installed a layer of 1″ Polyisocyanurate roof insulation (R-value 6.00). Over the insulation, we installed a new 060 TPO white thermoplastic membrane roof system, complete with all the necessary flashing and metal trim.

---

We removed several layers of roofing down to the wood decking. Installed a layer of 1″ Polyisocyanurate roofing insulation. Tapered insulation crickets between roof scuppers. Installed a new Mule Hide 060 fully adhered EPDM rubber membrane roof system, complete with all the necessary flashings.

---

The sewerage authority had a storm blow off the existing metal roofing over a freestanding structure that houses critical generators. We were hired to clean up the roof, and install a new Fabral corrugated metal roof system.

---

This flat roof was in very poor shape, and had been leaking all over. We installed a layer of 1″ Polyisocyanurate roof insulation and a fully adhered Mule Hide brand 060 TPO white membrane roof system complete with new roof drains and all the necessary flashing work.

---

The lodge was having bad leaks over the flat roof sections and along the front parapet wall. Because the stucco was falling off the wall it was letting water get behind the roofing. We removed all the stucco from the block wall. We anchored wood to this cinder block wall to create a smooth surface. Installed a new 060 White TPO membrane roof system complete with all the necessary flashings. We also replaced the gutters and leaders.

---

We were hired to replace the leaky warehouse roof (approx. 65,000 sq. ft). The challenge with this roof was that we were replacing a corrugated metal roof system with a conventional membrane roof system. We first installed a layer of 1.5″ Extruded Polystyrene insulation between the ribs of the metal roof. We then installed a layer of 1″ rigid Polyisocyanurate roof insulation mechanically fastened. Over the insulation, we installed a new Mule-Hide 0.45 TPO white membrane roof system fully adhered. Between the two layers of insulation and the new white membrane roof system, the customer has a building that not only is water tight but cooler in the summer and warmer in the winter. We presented the owners with a 15 year manufactures warranty for labor and materials.

---

We were hired by the township to replace the leaky garage roof. We first removed all the old existing skylights. Framed out the skylight openings and covered with new plywood. Removed the existing layers of roofing and wet insulation down to the wood deck. Installed a layer of 1.5″ Polyisocyanurate foam core roof insulation (R-value 9.0). Installed tapered insulation to form drainage crickets between the drains. Over the insulation, we installed a new 060 fully adhered EPDM rubber membrane roof system complete. In the end the township received a more thermally efficient roof system, that comes with a 15-year warranty. And probably the most important thing to them a dry building.

---

This Scotch Plains contemporary residence with flat/low slope roofs had active leaks. After removing a layer of timberline shingles and a layer of torch down we repaired wood damage and installed a layer of 1 ½” Polyisocyanurate roof insulation (R-value 9.0), then installed an 80 mil PVC Membrane roof system, fully adhered. The combination of the insulation and white membrane will result in substantial energy savings to the homeowner – as well as being environmentally friendly.

---

We were called in to stop leaks at several locations and upon inspection recommended a new roof system. At the owner’s request of an aesthetically pleasing and energy efficient roof, we installed a Carlisle 060 TPO Membrane Roof System.

---

Roof repairs – We stripped in seams on the existing roof system over a 20′ x 20′ area. We then applied two coats of Tremco Fluid Applied Acrylic Coating.

---

Replaced Front Mansard Roof – Removed existing asphalt shingle roof. Installed a new UNA-CLAD standing seam metal roof.

---

Roof Replacement – We removed the existing roof & installed a new Carlisle EPDM membrane roof system. The challenge on this project was to lift the large chillers and build new curb supports all while not disconnecting units and allowing the customer to remain open.

---

Installed a new cedar shake shingle roof system complete with all new copper work. Approximately 1600 Sq. Ft

---

Repairs as needed with new solar panel system

---

New Roof on Addition – Installed a new Carlisle 045 TPO Membrane Roof System over 20 Yr. EPDM. The TPO roof was a nice lightweight, affordable solution and came with a 15-year warranty.

---

We were contracted to replace the flat roof over the church office & day care rooms. The existing roof was an old dried out built-up tar roof system that had been patched a lot and no longer keeping the water out. One of the problems beside the roof failing was that the old flashings on the parapet wall were to low and the balance of the wall was exposed brick with a lot of the mortar joints falling apart. We installed a layer of 1″ Polyisocyanurate roof insulation and a new 60 mil TPO white membrane roof system. The walls were wrapped in full.